Product Details
Simplicity, Repeatability, and Accuracy. A standalone presettable controller that simplifies materials and product testing.
The eP2 Digital Controller performs mechanical tests on materials, products and components. It is a presettable unit that operates both electromechanical and servo hydraulic testing systems. The eP2 can also be used to retrofit/upgrade virtually any manufactures testing machine regardless of age or machine type. It is a less expensive and easier to use alternative to PC based materials testing systems and is capable of performing tests in tension, compression, bend and torsion. The eP2 features load and crosshead position inputs plus enhanced closed loop servo control capabilities for accurate and repeatable testing. An optional axial strain input channel can be added for accommodating extensometry.
Combining the eP2 controller with the PC based GaugeSafe Data Exchange software makes it easy to create and store unlimited number of test methods; save, export and print test results including stress vs. strain curves; import results and XY data into common spreadsheet and database programs for further analysis and reporting.
Click to view system brochure. Requires Adobe Acrobat Reader.
Simplicity, Repeatability, and Accuracy. A standalone presettable controller that simplifies materials and product testing.
The eP2 Digital Controller performs mechanical tests on materials, products and components. It is a presettable unit that operates both electromechanical and servo hydraulic testing systems. The eP2 can also be used to retrofit/upgrade virtually any manufactures testing machine regardless of age or machine type. It is a less expensive and easier to use alternative to PC based materials testing systems and is capable of performing tests in tension, compression, bend and torsion. The eP2 features load and crosshead position inputs plus enhanced closed loop servo control capabilities for accurate and repeatable testing. An optional axial strain input channel can be added for accommodating extensometry.
Combining the eP2 controller with the PC based GaugeSafe Data Exchange software makes it easy to create and store unlimited number of test methods; save, export and print test results including stress vs. strain curves; import results and XY data into common spreadsheet and database programs for further analysis and reporting.
 |
 |
 |
 |
 |
|||
Click to view system brochure. Requires Adobe Acrobat Reader.
Standard Features
- Display load, position, axial strain (optional), and
test rate during tests. - Display measured mechanical properties at test
completion. - Calculate key mechanical properties such as ultimate
strength, modulus, offset yield, percent elongation
and more. Calculations are in accordance
with ASTM and ISO testing standards. - Upload results and XY data via the GaugeSafe Data
Exchange program to a Windows based PC for
viewing and reporting. - Store up to six test methods internally. Access unlimited
number of test methods through the Gauge
Safe Data Exchange software. - Specify high and low limits for each mechanical
property for pass/fail indication. - Protect from inadvertent test method changes
through password only accessible supervisor/operator
modes. - Select between English, Metric and SI engineering
units. - Specify ramp to break, ramp to hold and cyclic sawtooth
and squarewave closed-loop servo control
profiles. - Perform load rate, position rate and strain rate
controlled tests. - Calibrate load and axial strain channels in accordance
with ASTM E4 and E83 standards, respectively.
Load accuracy exceeds ASTM E4 standards
down to 1/200th load cell capacity. - ADMET provides all calibration passwords for
streamlining maintenance costs.
